LumberJocks

Reply by diverlloyd

  • Advertise with us

Posted on How can I learn hoow to glue up a Sinister Type cutting Board without paying Photobucket?

View diverlloyd's profile

diverlloyd

3598 posts in 2338 days


#1 posted 09-24-2017 07:41 PM

I glue mine up with the points touching a 90 degree jig that is screwed down. Then use a flat piece on the other side and front to clamp to. If I had to do it over I would come up with a better way then individual pieces. If you need pics I can go out and take a pic of the jig but the cutting board is already done and squared. I should post it as a project maybe. I also glue up on a piece of tempered glass. Check to make sure all the pieces are the same a couple of mine were of by .05 and I made some more cuts to get them all with in .01 and it made a difference.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com