Reply by Mark Shultz

Posted on Crown too thin after changing spring angle?

131 posts in 2947 days

#1 posted 09-13-2017 08:50 PM

Cabmaker, yes there are non standard cuts. I was surprised how poor the online guidance is on this, but a scrap 5’ of molding was enough to figure out the angles without using corner blocks.

Fire – It’s maybe 3/4” or so gap prior to planing.i think it could tolerate up to 1/8” gap before looking odd.

Go to Pulse page »

LumberJocks Pulse

	Author	Latest activity	New comments or replies since you last checked
DW 735 knives	jbmaine	12-05-2019 06:02 PM	sign in to get readership tracking
Width of band saw blade	nate22	12-05-2019 05:55 PM	sign in to get readership tracking
Table saw throatplate question	Robert	12-05-2019 05:54 PM	sign in to get readership tracking
HOT DEALS 2.0: Coupons, Sales, Black Friday, eBay, Amazon, BORG, Zoro, Woodcraft, etc.	Woodknack	12-05-2019 05:52 PM	sign in to get readership tracking
Delta 40-601 SS rehab help	MrUnix	12-05-2019 05:44 PM	sign in to get readership tracking
Charcuterie borrd	tim387	12-05-2019 05:41 PM	sign in to get readership tracking
Deep diving crankbait	Craftsman on the lak	12-05-2019 05:35 PM	sign in to get readership tracking
woodworkearq's Profile	woodworkearq	12-05-2019 05:32 PM	sign in to get readership tracking
Key hangers	tim387	12-05-2019 05:31 PM	sign in to get readership tracking
2020SurpriseSwap	GR8HUNTER	12-05-2019 05:31 PM	sign in to get readership tracking

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics