Reply by Carloz

  • Advertise with us

Posted on Crosscut sled issues

View Carloz's profile


1147 posts in 1475 days

#1 posted 08-25-2017 08:08 PM

1. Mark the runners with a black marker. If you do have black use red, if you do not have red use blue.
2. Insert the sled into the slots and move several times, You might need a good push if the wood swelled.
3. Take the sled out and see where the marking is gone. Remove the material in those spots.

The best tool that works, but you are unlikely to have is a shoulder plane. A piece of rough sandpaper on a wood block works too.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics