Reply by Nubsnstubs

Charles, you are showing in the circle a spindle and spur. It’s threaded onto the spindle. The picture also shows a wrench flat which tells me there is another at 180 degrees. Problem is, can’t tell whether the wrench flat is on the spur or the spindle. If it’s on the spindle, just get a wrench that fits the flats, and a wrench to fit the spur. It will come off by holding the spindle from turning, and pulling on the wrench you have on the spur. Might take a bit of creative holding, but it should come off…........ Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com