LumberJocks

Reply by squared

  • Advertise with us

Posted on General International drum sander 15-250M1 problem

View squared's profile

squared

1 post in 1174 days


#1 posted 08-11-2017 04:00 AM

So I was having the same problem. Intermittent stopping of feed belt. First thing I did was remove the DC drive motor. I then tested it and had the same problem. It would start and stop randomly. I figured that it had to have something to do with the speed controller/DC transformer. I inspected the board (located behind main switch under black cover) and wiggled a few of the components. Tested again and it was totally dead.
This time I opened the speed controller and removed the circuit board and inspected the solder joints. I found 5 that looked suspect. (If you don’t know what a bad one looks like, search google for “broken solder joint”.) I heated up my soldering iron, remelted the solder, put everything back together and it works like a charm.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com