Reply by jim_s

  • Advertise with us

Posted on Sanding Bandsaw Tires

View jim_s's profile


3 posts in 1173 days

#1 posted 08-08-2017 06:27 PM

Thanks for the quick reply.

I believe you are correct about the crown being in the tire. I have not checked for other options in the tires. Flat vs. crowned. Seeing as the advertised spec of the saw says it can function with blades this narrow you would think….I don’t have a problem with attempting to sand a small flat surface on the tires. I’ve never seen this as a recommendation which is why I’m checking with the “experts” here.

The scroll saw is a good idea except when cutting bandsaw boxes that are several inches thick. The use for the narrow blade is for the tight radius encountered in some boxes.

Reviewing my original,post, I failed to mention that the blade guides are not engaged. At one point I actually removed the upper and lower guides from the saw to get a clearer view of what was happening.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics