LumberJocks

Reply by knotscott

  • Advertise with us

Posted on question on glue line rip

View knotscott's profile

knotscott

8365 posts in 4008 days


#1 posted 08-01-2017 07:56 PM

The Freud 30T GLRs (LM74/LM75) use extremely tight side angles to give a more polished edge. It works well for the polished edges, but the same characteristics that cause the polish also cause more heat, which can lead to burning in thicker woods, thus the 1” recommendation.

An 18T will chomp through really thick would with less resistance, but also a rougher cut. Depending on your saw, you might find that a 24T rip blade would serve you well, giving a decent cut with no burning.

FWIW, Cripe Distribution offers the German made Delta Industrial 35-611 18T for < $30 on Ebay if you want to try one.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com