LumberJocks

Reply by TungOil

  • Advertise with us

Posted on Space Ball question

View TungOil's profile

TungOil

1319 posts in 976 days


#1 posted 07-19-2017 04:37 PM

They are 1/4” diameter. I usually allow a heavy 1/8” clearance on either side and compress them some on installation. So my panels are 1/4” to 5/16” narrower overall than the overall length of the rails (tenon to tenon). This seems to work well for me using the standard 3/8” tenons off my shaper cutters. I use eight balls per panel, regardless of the panel size. Two on each edge, located close to the joint.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com