LumberJocks

Reply by Mike Turner

  • Advertise with us

Posted on Selecting the Right Jaws For Nova G3 or Super Nova 2

View Mike Turner's profile

Mike Turner

72 posts in 3077 days


#1 posted 07-18-2017 08:40 AM

I finally got to finish this one up.I turned a piece of wood between centers to get it to size so I could hold it in my chuck. (It was oversize for now.I left plenty to turn it down to size and true it up) Then put the wood into the chuck with the aluminum disk mounted to it. I turned it….. the aluminum disk… to size so it would fit the chuck. I then put it back together and it appears to be good to go….With it together. The longworth chuck seems to have a slight bit of runout…just a slight wobble.. but I think it would be about the same if I had gone to a machine shop….I will be using it at low speeds to clean up the bottom of bowls so it wont be a problem…

-- Mike,North Carolina


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com