Reply by bshaff

  • Advertise with us

Posted on 36-600 DELTA 10" TABLE SAW

View bshaff's profile


20 posts in 1397 days

#1 posted 07-09-2017 10:40 PM

Thanks for the replies. I know it is not my GFCI that is bad. I also know that the brushes in the motor are eaten up real bad. I checked them about a year ago and they were very very good but now they are almost gone.
I looked in the holes where they go and see that one of the splines on the internal shaft is bent and I suspect that has caused the brushes to be eaten up. I am not using the correct terms here so forgive me. I tried to get the motor apart and can not do it. I got it off the machine and took off the c clip on the large splined wheel where the belt goes but I can not get the large wheel off. I have pried it and used different means to try to get it off and it will not come. I hope I can get it apart and somehow fix the bent part in the inside.
Any ideas?

-- Barry

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics