LumberJocks

Reply by Carloz

  • Advertise with us

Posted on how to attach raised panels?

View Carloz's profile

Carloz

1147 posts in 1155 days


#1 posted 07-09-2017 07:32 PM

The stiles and rails are already done and came out good. Yes the bit is a bit tall. I had to attach an auxiliary fence to the router table as the original fence was too low. I had to dial the router down and do it is shallow passes.
It is scary to use and very loud. It took me 2 to 3 hours to make all 8 doors from hard maple. Softer wood would be much easier as a test on some pine board was much easier and faster. Out of all 32 pieces probably 4 or so show some chatter marks so I have to sand it down.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com