LumberJocks

Reply by ArtMann

  • Advertise with us

Posted on New Table Saw Blade

View ArtMann's profile

ArtMann

1483 posts in 1698 days


#1 posted 07-09-2017 01:10 AM

I don’t have a catalog in front of me so I can’t give you a model number but I like the 30 tooth Glue Line Rip blade made by Freud. It is the one with the red non-stick coating. In your case, I would strongly recommend the narrow kerf version. I used a Craftsman 113 series table saw for about 20 years and when I replaced the regular blade with a thin kerf one, it was like I replaced the motor with a higher power one.

I used to have a Craftsman radial arm saw. It had this tendency to self feed to the point it would stall itself out. I sold it rather than deal with the problem but I hear the crosscut blades with a negative hook angle work much better.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com