Reply by Corasco

  • Advertise with us

Posted on Delta 40-440 purchase?

View Corasco's profile


1 post in 924 days

#1 posted 07-07-2017 03:45 PM


I just bought a 1950’s 40-440 and failed at installing a blade (it had none). I also think I may have dropped/lost a part in trying this. Could I call you or ask you to call me to discuss the parts, or could we e-mail to figure out what I have done?

I loosened the two screws in the square upper blade holder sleeve (one is a thumb screw and the other is a slotted screw) and now there is only one “square part” (flat on oneside and champfered on the other with a threaded hole in the middle) left on the table.

My son was helping me and he tried to install a blade with pins but I believe this machine uses flat blades; is that correct?

Is this something you or others might be able to help on?

Many thanks in advance.


-- Kit

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics