LumberJocks

Reply by mrg

  • Advertise with us

Posted on Help Needed Makita 2704 fence and blade

View mrg's profile

mrg

870 posts in 3803 days


#1 posted 06-03-2017 02:25 PM

With the aux fence in place you have zero. The saw is set for use with the aux fence. If you want to use the fence without the aux fence slide the fence to the blade loosen the two screws for the curser and adjust to zero. Now it is setup for using the fence without the aux fence. The difference in your reading is the thickness of the aux fence.

If you were crosscutting using your miter gauge and you wanted a length of 3 inches you would put a block of 3/4” as your stop. Set the fence to 3 3/4 to get a 3” piece and not pinch once thru the blade.

Does that make sense.?

-- mrg


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com