LumberJocks

Reply by Hard_as_Wood

  • Advertise with us

Posted on Rikon 10-324 Blade Tension is screwy

View Hard_as_Wood's profile

Hard_as_Wood

37 posts in 1791 days


#1 posted 05-19-2017 11:46 AM

Yes, when the tension is off then the blade came off and on very easily.

It’s when I put the blade tension on and then try to loosen the tension is when I run into problems. I went down again this morning and looked at it again and I think I might be blowing this out of proportion. I did run it yesterday several times to check for blade tracking and all was good.

According to Alex Snodgrass video https://youtu.be/wGbZqWac0jU?list=PL4-DbKF0dMcCQxNI44XTrpUjZtafrFcmE on how to setup a BS for resawing I have the correct tension on the blade and this time it didn’t make those odd popping sounds… I think I’m nervous, I don’t want to ruin my bs

whats the worse that could happen? blade brakes?

-- Ciao!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com