Reply by TungOil

  • Advertise with us

Posted on Potential shop layout, trying to decide on size

View TungOil's profile


1301 posts in 946 days

#1 posted 05-14-2017 01:26 AM

Don’t forget to figure in space to store materials. Also consider swapping your chop saw to the wall on the right so you can break down 16’ material. I had mine on a short end wall in my second shop and it was terrible for workflow. Every board has to be turned 90 degrees for cross cutting then 90 degrees back to joint or rip. That got old quick. It will also help free up you TS infeed area which will be useful when you need to break down a 4×8 sheet of plywood.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics