LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on Teco L510 VFD help

View MrUnix's profile

MrUnix

7446 posts in 2650 days


#1 posted 05-14-2017 01:02 AM

To be specific, I want to use the switch on the saw to control the VFD through some of the low voltage terminals. This is possible right? I would love to hit the off switch on my saw and have the VFD start to slow the motor. By no means am I suggesting running the power through the switch, but rather to communicate to the VFD with the switch when to turn on and off. Make sense?
- Lutherman

Absolutely… they are designed to be used with three-wire control… and the L510 is even easier than it’s cheaper FM50 cousin.

As for mounting on the saw… that’s what I did on my Uni by incorporating it into the motor cover, and using the existing start/stop control station to control it:

3-wire control wiring is discussed in the manual, starting around page 4-34.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com