Reply by MrUnix

  • Advertise with us

Posted on Table saw arbor nut loosening with dado stack

View MrUnix's profile


7506 posts in 2742 days

#1 posted 05-12-2017 04:34 AM

I’m not aware of any brake on a TS, but I’m no expert. My experience is the motor and blade take quite a long time to come to a stop.

I can spin the blade off my TS when powering down if I want (which I don’t!)... I just set the deacceleration time to a couple of seconds or less :)

AFAIK, that griz just has a pretty standard TEFC motor and there is no mechanical brake involved… although a lot of people hear the centrifugal switch closing down and mistake that noise as a brake. Depending on age, it may be slowing down faster than normal due to bearings, but they would have to be pretty bad to effect it enough to spin the blade off.


-- Brad in FL - In Dog I trust... everything else is questionable

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics