LumberJocks

Reply by hotbyte

  • Advertise with us

Posted on In a bit of a pickle

View hotbyte's profile

hotbyte

1000 posts in 3371 days


#1 posted 05-03-2017 08:22 PM

On issue #1, I’m wondering if there is anyway to peg it from the bottom side that would still allow expansion of top. You would need someway to elongate the peg hole on table tongue which is captured inside the breadboard groove. Maybe you could route out an access area on bottom, create elongated hole, glue in fill block with standard hole for peg. By doing a non-through peg from bottom it would basically be hidden.

One the router slipup notch, could you make corners rounded or chamfered (from plan/top view)? It might not fit into table style as well as sharp corners but would eliminate the notch.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com