Reply by JBrow

  • Advertise with us

Posted on Assembly Table for My Shop

View JBrow's profile


1368 posts in 1373 days

#1 posted 05-01-2017 01:41 AM


The easiest and fastest solution could be a sheet of ¾” MDF cut to 3’ x 6’. The MDF could be set atop your work bench or on a pair of saw horses when needed and leaned against the wall when not needed.

If more support of the MDF is desired, a 1” x poplar frame could be built with interlocking half lap joints cut into the edges of the poplar. The frame could be set on the workbench or saw horses and the MDF overlaid on the frame. When not needed the MDF could be stowed and the half lap jointed frame disassembled. If a 3’ x 6’ MDF panel is too large, it could be cut down and the several smaller sections of MDF could be laid atop the frame.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics