Reply by onoitsmatt

  • Advertise with us

Posted on Making a Jointer Plane (Advice/knowledge sought)

View onoitsmatt's profile


446 posts in 2062 days

#1 posted 04-18-2017 05:34 PM

It is 22” long. I took some rough measurements so within 1/8” or so:

The front of the mouth is about 7 1/4” from the toe and is about 1/4” deep (so back of mouth is about 7 1/2” from the toe.

The opening in the top for the wedge and iton starts at about 6 1/2” from the toe and goes to about 10 1/4” from toe. Plane has a thick iron and a cap iron.

-- Matt - Phoenix, AZ

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics