LumberJocks

Reply by shipwright

  • Advertise with us

Posted on An Apprentices new way of veneering

View shipwright's profile

shipwright

8593 posts in 3677 days


#1 posted 04-17-2017 06:59 PM

This isn’t easy to see but I think what you are referring to as cauls are only about 1/4” thick. That would be your problem. The cauls should be at least 3/4” thick. I use double 3/4” MDF in my press.

Are you asking about evening the surface of sawn veneer before pressing to the substrate? Traditionally that has been the job of the toothing plane. If you are referring to fixing your wavy glue up I would doubt it can be saved unless you were using hide glue. If you were, strip the veneer and re-glue it with proper cauls.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com