Reply by splintergroup

  • Advertise with us

Posted on Disc Sander Runout

View splintergroup's profile


3064 posts in 1784 days

#1 posted 03-18-2017 03:05 PM

Check the runout without any paper installed to see if the plate is true. Depending on how it is attached, you may be able to rotate it on the shaft and lock it down in a position that cancels out the 0.02 runout.

There always will be some given the paper, but for your use I’d try to eliminate it all.

If the plate is aluminum, you could use a straight piece of steel with a wrap of 100 grit silicon carbide paper and hone it flat with the disc running. 0.02 is not much, but definitely in the annoying range.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics