LumberJocks

Reply by bonesbr549

  • Advertise with us

Posted on Need to remove plugs

View bonesbr549's profile

bonesbr549

1588 posts in 4151 days


#1 posted 03-08-2017 08:45 PM

Ok depending on how well you glued in (I tend to over achieve), A good solution I’ve used in this is a set of plug cutters. Just go one size bigger than the plug drill down and you won’t damage the screw head. You can then get it out and do over.

If not drill it out and use an ez-extractor bit to get the screw out.

I have both these and they come in handy!

http://www.toolnut.com/snappy-43300-plug-cutter-set.html?utm_source=google_shopping&gclid=Cj0KEQiA9P7FBRCtoO33_LGUtPQBEiQAU_tBgANL77oHvX_jcolyJQQWBo8DSxwvFSmRyCFItb-CvQUaAuAO8P8HAQ

https://www.amazon.com/Extractor-Aisxle-Stripped-Hardness-62-63hrc/dp/B01CA1PSCQ/ref=sr_1_1?ie=UTF8&qid=1489005889&sr=8-1&keywords=ez+out+screw+extractor

-- Sooner or later Liberals run out of other people's money.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com