Reply by JBrow

  • Advertise with us

Posted on Sander Question

View JBrow's profile


1368 posts in 1837 days

#1 posted 02-24-2017 02:01 PM


I agree with HokieKen but do not have a spindle sander. I substitute a sanding drum chucked into the drill press. However, using a sander, rasp, file, or scraper is a slow go. A plane or similar tool like perhaps a spoke shave or curves, would be faster. A plane is easy enough to control, but some care would be required with the spoke shave.

If I need more than one workpiece that has non-straight edges, I like to build a template, using the sanding drum to smooth and fare the curves. I then use a pattern or flush trim bit in the router along with the template to remove mill marks left by the bandsaw or jig saw. If the edges are straight, a straight edge, preferably from wood or a wood-product sheet good, could be used as the router template.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics