Reply by HerbC

  • Advertise with us

Posted on bandsaw blade out of round

View HerbC's profile


1815 posts in 3779 days

#1 posted 02-22-2017 07:35 PM

Also, using a 1/4 blade with a riser block installed is probably wrong. The purpose of the rise block is to increase your maximum resaw width and you generally want to use as wide a blade as the saw will use when resawing (typically 1/2 inch wide blade with a low tooth count, ideally 2 to 3 teeth per inch).

I may be wrong here since it’s been years since I had a bandsaw. Perhaps others will chime in and give you more detailed advice.

Good Luck!

Be Careful!


-- Herb, Florida - Here's why I close most messages with "Be Careful!"

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics