LumberJocks

Reply by sawdustdad

  • Advertise with us

Posted on Can You drill any steel??

View sawdustdad's profile

sawdustdad

379 posts in 1936 days


#1 posted 02-21-2017 07:54 PM

Depends on the quality of the drill bit, the type of drill bit and the hardness of the steel. Most twist drills are ground with tip angles appropriate for most materials, including mild steel. Cheap bits from Harbor Freight are not going to work or last, so buy good quality drill bits. Even then, they can be resharpened or may need to be if misused.

Yes, add some oil to the cutting process to keep the bit from overheating. As an example, I had to drill 3/8 in holes in some AR400 plate steel—hardened (abrasion resistant) steel. I got half way through the 3/8 in plate before the drill bit quit cutting. Sharpened it, and added oil. It went through that plate and 5 more without any hesitation. You can use pretty much any oil you have around, it doesn’t need to be cutting oil.

-- Murphy's Carpentry Corollary #3: Half of all boards cut to a specific length will be too short.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com