LumberJocks

Reply by CaptainSkully

  • Advertise with us

Posted on Designing a Sushi Tray - wood movement problems?

View CaptainSkully's profile

CaptainSkully

1615 posts in 4893 days


#1 posted 11-16-2011 07:21 PM

The expansion will be a very small percentage of the width. For my 40” wide table, the wood moves 1/4” on each side, which could cause problems with the joinery (hence the precautions you take with a breadboard end). For a tray that’s 6” wide, it’ll be very small. I’d screw the runners on and plug the holes. The screw will allow the expansion you need. Glue will probably crack, especially since this tray will be washed, introducing moisture.

-- You can't control the wind, but you can trim your sails


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com