LumberJocks

Reply by EricTwice

  • Advertise with us

Posted on Craftsman 8" table saw

View EricTwice's profile

EricTwice

248 posts in 1384 days


#1 posted 02-20-2017 12:59 AM

My attitude is “It’s what I’ve got let’s see if if we can make it work”

1. check your power cord and remove the blade. plug it in and see if the motor works.
2.check drive belts, check blade for sharpness, replace as necessary
3. clean and wax the table and fence. there should be no lumps bumps of crud. these will damage your work or make it difficult to control.
4. test the fence and adjust as needed
5. run a test cut and see how it goes.

this said I would keep my eyes open for an upgrade

-- nice recovery, They should pay extra for that mistake, Eric E.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com