LumberJocks

Reply by Woodchuck2010

  • Advertise with us

Posted on Made another jig for my sled

View Woodchuck2010's profile

Woodchuck2010

727 posts in 1221 days


#1 posted 02-17-2017 08:40 PM



I assume that the t-track only uses one bolt/knob and references off the 90degree back? if thats the case Lazyman, the t-tracks wouldn t need to be precisely parallel to the blade.

- tealetm

Correct. There is another slot for a bolt in the rear, but Nick says it works just fine if it’s up against the fence. I’ve only tested one piece and it’s quite accurate. Just follow his plans, and it all works out. lol One thing I changed was the elimination of the slots cut into the back fence for the t-track bolt insertion. I instead drilled access holes in the t-track to insert the bolts. I like the cleaner look AND you aren’t limited to a certain length bolt for the jigs.

Before

After

Heres the hole in the T-track. Works great

-- Chuck, Michigan,


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com