LumberJocks

Reply by HorizontalMike

  • Advertise with us

Posted on Type 2 Sargent frog replacement question

View HorizontalMike's profile

HorizontalMike

7898 posts in 3794 days


#1 posted 02-17-2017 07:25 PM

Don,
Looks like I will have to re-tap the lever cap screw hole if I want to go with a Hock chipper then. If I am ONLY going to be putting the Hock Chipper on my PreVBM #418, then it is probably worth it.

I just went out and checked some measurements. The drill tap hole is 7/32in as measured by my sticking a 7/32 (0.21875in.) drill bit in the hole. And the average (of 6-checked) of the lever cap screw body diameter is 0.2677in. (L=.2645 & H=.2715). SO there is no going back since the 9/32in completely eliminates the OEM screw by size.

-- HorizontalMike -- "Woodpeckers understand..."


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com