LumberJocks

Reply by I_Need_More_Lumber

  • Advertise with us

Posted on Looking for a super thin saw blade

View I_Need_More_Lumber's profile

I_Need_More_Lumber

32 posts in 1719 days


#1 posted 02-17-2017 05:56 AM


Ripping with band saws and table saws is not directly interchangeable between the two. A table saw can leave a pretty clean edge, and usually a light sanding will put you at the finish ready level. A band saw leaves a much rougher finish, meaning additional smoothing is necessary, usually with a planer or jointer….not a trivial thing to someone who doesn t own one, and still extra steps for those who do. Once all is said and done, the total kerf width of the actual band saw cut, plus planing away the rough finish are likely to consume as much or more material than a TS with an ultra thin kerf blade. Am I missing something about ripping with a band saw?

- knotscott


Good point.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com