LumberJocks

Reply by knotscott

  • Advertise with us

Posted on Looking for a super thin saw blade

View knotscott's profile

knotscott

8392 posts in 4291 days


#1 posted 02-16-2017 10:10 PM



I don t believe a blade with a 1/16” kerf will rip with any accuracy. Because of it s thinness, the blade will have the tendency to “flutter”. I m not familiar with the Infinity blade, but it doesn t sound like a good idea. I ve used really thin kerf blades on my table saw, but they were 7 1/4” i diameter and used on small stock and still it flutters at times.
Typical band saw blades are .025 or .035 thick.

- MrRon

Having done it with the Infinity Laser Kerf blade, I have to respectfully disagree, though I do understand your logic. They did a nice job with this blade. No doubt, a thinner blade can be more susceptible to flex, but between the permanent stabilizer and the quality of the construction and design, this one really worked quite well IME.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com