LumberJocks

Reply by knotscott

  • Advertise with us

Posted on Looking for a super thin saw blade

View knotscott's profile

knotscott

8392 posts in 4288 days


#1 posted 02-16-2017 03:58 PM


.... A 10” thin blade will probably flex while cutting and leave worse marks on the edge, so you ll be complaining about that….

- Nubsnstubs

Having used the blade, flex and cut quality were not an issue IME. Possibly in part due to the built in stabilizer in the center, possibly in part to the stock being flat and straight, possibly due in part to the saw being setup well and an arbor that spins true. Whatever the reason, it was a remarkably clean cutting blade that leaves an edge on par with other premium 40T ATB designs including the WWII, TS2000, Gold Medal, etc.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com