LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on Bandsaw maintenance crash and burn

View MrUnix's profile

MrUnix

7833 posts in 2877 days


#1 posted 02-13-2017 05:28 AM

Yup, on a lathe is the easiest. Turn a blank to 2.5” and then slice off pieces on the band saw. For the HDPE, I just melt some in a slightly oversized metal can and then throw it on the lathe to turn to final diameter. I originally used wood, but it is a bit flimsy. The HDPE is pretty stiff stuff and works much better (those shown are actually from fabric softner jugs, not milk jugs :). If you don’t have a lathe, I guess you could always get some 2.5 inch wood dowel and do the same.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com