LumberJocks Woodworking Forum banner

Is non kiln-dried spalted maple food safe?

3K views 6 replies 6 participants last post by  EricTwice 
#1 · (Edited by Moderator)
Hello all. I have some spalted maple that I found among some dried firewood, and i carved a cooking spoon out of some.

My question is this - my moisture meter is reading 15% moisture. But being firewood, it was never kiln dried. Ive finished the spoon with danish oil, but just want to make sure this is enough. Is it going to be safe enough for cooking with?

Thanks!
 
#3 ·
Spalting (color change) is caused by fungi growing in the wood. Personally, I would not cook with a spalted spoon. Others will likely have other opinions.

Claude

- ClaudeF
True, but I've read that once the moisture drops very low, the fungus is essential "dead". On top of that, the fungus is apparently only hazardous if breathed in (so during sanding for example). Just wanted to know if others would agree with this. This is just from what I've read online.
 
#5 ·
Spalting, as ClaudeF correctly points out, is caused by fungi growing in the wood. Several types of fungi- some more toxic than others, cause this spalting. Also consider that many types of bacteria always accompany these fungi. If you told me that you steamed the wood to kill most of these and then dried it and applied a food grade mineral oil, I wood say that it's ok to use as a salad spoon, but still not the best choice for 'cooking' with. And Bondo Gaposis is also very correct about the Danish Oil- not something to be exposed to food.
 
#7 · (Edited by Moderator)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top