LumberJocks

Reply by magaoitin

  • Advertise with us

Posted on 1950's Powermatic 60 8" Joiner - Electrical Question

View magaoitin's profile

magaoitin

249 posts in 1872 days


#1 posted 02-09-2017 12:06 AM

Well it’s 50-50 reasoning (and maybe flawed at that!)

Part of it is that I don’t like a big grey box mounted on the outside of the machine, and the other part is the current wiring has 2 or 3 wires that have come loose and I cant figure out where they go.

I have contacted the manufacturer of the thermal overload and controller, but their tech department has not gotten back to me (for 4 weeks now), and I cannot find a wiring diagram online for the specific model of controller&overload to figure out what wire goes where to the 12v on/off switches.They have changed/upgraded their controllers. It is AutomationDirect.com parts, but their spec sheets don’t give me enough info to know the specifics of “put the wire from the ON switch to terminal A and the wire form the OFF switch to terminal B, type of info. I need it dumbed down that far since I have never really worked on a 3 phase motor.

I have the room to put the Static Phase Converter inside the cabinet, but there wouldn’t be enough room for both boxes.

-- Jeff ~ Tacoma Wa.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com