LumberJocks

Reply by bigpapaporsche

  • Advertise with us

Posted on Delta T2/3 Table Saw Fence

View bigpapaporsche's profile

bigpapaporsche

9 posts in 1335 days


#1 posted 02-04-2017 03:20 AM

John, I understand, in my case since I bought a used SS I didn’t have a fence option. I was very happy with my Cman, but when I purchased a new Freud Stack Dado set, (which I wanted for year) I ran into the famous Arbor problem. I found the Dado would not cut the bottom of the groove smoothly, so I used this as well as the safety features, as an excuse to buy the SS. The plan is to install the T3, I found one on CL for $150.00, new but never installed. The plan is to replace the SS extension wings with MDF wings, one with a Router Table, the other side just plank. I have half of a 2 car garage to use so I can’t spread out much. I’ll probably remove the Saw from its stand and mount it on top of a Work Station Cabinet, which I did on the Cman saw. I locate me Shop Vac Dust Collection system under the left side and my surface planner under the right side. I will be very satisfied, if the SS, with the T3 fence performs as well has the Cman did, but of course much safer!!
I am curious, why did you switch?


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com