Reply by Nate1

  • Advertise with us

Posted on Stopping HVLP Splatter

View Nate1's profile


20 posts in 2627 days

#1 posted 01-22-2017 08:19 PM

I have not tried spraying other coatings. Water sprays nicely.

Product is mixed thoroughly before spraying. Product does not experience much settling or at least to the level of piling in the bottom of the 1 gallon can. I have used a gallon of this product beforeā€¦I was amazed at the lack of pigment hanging out when I got to the bottom of it.

30psi. Have tried up and down 10psi with no noticeable improvement.

I am heading out to do some tests thinning it more now.

Have not ran it through a viscosity cup. Do not own one….yet. :-)

I have tried the 1.9mm the manufacturer recommends and a 1.3mm.

Outside of the tip/nozzle is getting boogers. When I stop I clean it off, but no that certainly does not help when spraying and could be the source.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics