I have an itch to spend some money. A block plane specifically. Read a bunch of reviews here but nothing I've read has swayed me one way or the other.
1. Do I want a low angle or Standard? I know a low angle is better for end grain. But, will the low angle function OK for other things? Would I be better off with the standard angle for end grain? Most of the review titles I saw were for low-angle planes. Which tells me a lot of people thought the LA was what they needed.
2. Brands? LN, Stanley, Wood River… any Thoughts? Decision, Decisions.
I see lots of Jack, Smoothing, and Jointer planes at flea markets and Craig's List but I'm not seeing BP's. So I think I'll go new.
I have the LV Veritas LA block plane, which is great. I have a older stanley and a groz, and neither work as well, or feel as good in the hand as the LV.
Main ones I USE all the time….Millers Falls No.56B Low Angle Block, and a Stanley 60-1/2 Low Angle Block….but, then again….I have 10 block planes in the shop. Millers falls and Stanley made very good block planes. And, IF one tunes them up right, will keep up with the fancy-schmanzy new made ones,,,,,
A block plane is just that..a block plane. Learn to sharpen the irons, and then put them to use.
Nice group of planes you have back there in the pic bandit. There's a bunch of block planes on ebay for dirt cheap. You might be able to get a standard and low angle for a good price.
I have the new Stanley sweetheart 60 1/2, low angle block plane and find it very useful. I'm very new to planes, but I've found it to be handy, seems well made, and reasonably priced.
I had a love hate relationship with my Stanley 60-1/2. I now have a love love relationship with LN 60-1/2. I'm not a fan of low angles on anything but endgrain though.
I don't know what your plans are for the plane, but the LN 102 is a quality item and won't break the bank. Perhaps it's too small for your needs, but I love mine.
I had a love hate relationship with my Stanley 60-1/2. I now have a love love relationship with LN 60-1/2. I m not a fan of low angles on anything but endgrain though.
First, I want to nominate Smitty for best signature.
Second, I don't get the reference to "other people's money." I'm not trying to start a fight, but it's my money, I earned it, and if I want to spend it on LN planes, I will.
I admire the guys who can take a garage sale plane and spend hours refurbishing it. That takes real skill. But, it's not how I want to spend my time. I base my budget for tools on how much having near perfection will benefit me, and planes are up at the top. I don't mind taking a few minutes to flatten the backs of my $100 set of Narex chisels, since I'm not Frank Klausz, and I don't need a $600 set. Planes are a different animal in my mind. There's more to it than just the flatness of the sole.
My most used block plane is a Brass LN 102 then a Veritas Apron plane with the PMV-11 iron then a Stanley 60 1/2 upgraded with a PMV-11 iron and if the need for a little shoulder work arises a LN 60 1/2 rabbit pops out. It all depends on what need to be done and of course which one is read with a sharp blade! The sharp blade will usually make a major difference in every planes performance.
I agree, I get a lot more use of my Low angle, I do wish I would have opted for one that could be used as a shoulder plane, since that's my second most used.
I would also recommend LV or Veritas, both have great feel during use. I have a variety of planes from, no name up and the expense is worth it for no setup headaches and a tool that holds and edge and stays setup while working. My Stanley's come out of I'm working rougher wood that I have to get aggressive with and might have dirt or foreign matter in the surface but they are not my choice for detail or finish.
Then why this post, if you already made up your mind?
For all I care, you can go out and blow the entire check on one plane, or just walk into a "Menards" and buy a brand new in package Stanley. $32.
I was saying what I use for block planes. And mine do quite well, thank you very much. Shoulder plane? Yep, have one of those planes, too.
Now then, are you planning on having the seller drop by and sharpen the plane as needed? Or, just sending it back for a new one when the first gets dull?
+2 or +3 now (lost count) for the LN low angle rabbet block plane. I love mine. Very versatile and robust.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
LumberJocks Woodworking Forum
2.5M posts
96.9K members
Since 2006
A forum community dedicated to professional woodworkers and enthusiasts. Come join the discussion about shop safety, wood, carpentry, lumber, finishing, tools, machinery, woodworking related topics, styles, scales, reviews, accessories, classifieds, and more!