LumberJocks

Reply by shipwright

  • Advertise with us

Posted on Hammer Veneer Staining

View shipwright's profile

shipwright

8344 posts in 3250 days


#1 posted 12-16-2016 03:16 PM

If you are using a two ply veneer then that will be your problem. You are likely seeing the glue line between the microscopically thin curly maple and the backer. Get some raw veneer, as thick as you can find, and try again. 1/42” is about the norm these days but 1/32” is still around but harder to find. Good luck.
No need for the vinegar. Hide glue cleans up with water.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com