LumberJocks

Reply by Imakenicefirewood

  • Advertise with us

Posted on $ amout to offer for older unisaw with bent arbor: Answer $300

View Imakenicefirewood's profile

Imakenicefirewood

77 posts in 2241 days


#1 posted 12-02-2016 01:34 AM

Well I used the trick as suggested above by Brad (thanks), and I got the wobble on the arbor down from 0.003-0.004 to about 0.0015. There was still some noticeable wobble on the blade as the saw was shutting down, and I thought it might be the harmonics of the blade. So I put a brand new rip blade on the saw and it seemed to help, but there was still a little that could be seen as the saw is shutting down.

I wanted to see what the difference in the thickness of the blade and the thickness in the cut was, so I scored a piece of hard maple and measured. The cut was 0.016 wider than the teeth on the blade. I think this may be about as good as I can get it without replacing all of the internal workings.

Sorry…no pictures of the process. The phone was plugged into my speakers while I was working on all of this.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com