LumberJocks

Reply by icapture

  • Advertise with us

Posted on Blade won't align and maxed out - Any suggestions?

View icapture's profile

icapture

10 posts in 1921 days


#1 posted 12-01-2016 09:43 PM

Well, resolved the issue. The mounting holes in the rear trunion were not large enough. Drilled out the holes to 1/2” (largest bit I had) and then took a bit more material off with a dremel tool (with this bit http://el34world.com/Misc/bike/images/dremel.jpg)

For those wondering if perhaps the front trunion was installed incorrectly, I adjusted it as well and it made no difference. Removing material seems to be the only fix.

Saw blade is now in perfect alignment with the miter slot. Strange that Deltas quality control didn’t catch this.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com