LumberJocks

Reply by icapture

  • Advertise with us

Posted on Blade won't align and maxed out - Any suggestions?

View icapture's profile

icapture

10 posts in 1923 days


#1 posted 11-30-2016 05:21 PM



I only glanced at the video. Not familiar with the pals gizmo. I had a similar situation with my Delta. I ended up loosening the two nuts on the trunion(?), Facing out of the back of the saw then tapped it one way or another with a mallet which did the trick.

- mike02130

Yes, that is what the video’s recommend. The problem is that I need to tap the trunion to the right and it won’t go anymore right. I am going to mess with it some more today, but if anyone has any ideas I am open to suggestions. I will report back if I figure it out for anyone in the future running into this problem.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com