LumberJocks

Reply by thor2015

  • Advertise with us

Posted on Router table cabinet

View thor2015's profile

thor2015

46 posts in 2526 days


#1 posted 11-06-2016 03:02 AM

I apologize for the slow progress but I got some time to get out to the shop and get the MDF core for the top assembled. I wound up running out of glue but I was able to get a decent bead distributed over the surface of both pieces. I also wound up using a few more screws than most would probably use but I’ve read stories on screws stripping out on MDF and wanted to make sure that if one or two didn’t bite that I would still have adequate clamping force. I countersunk both sides of the bottom layer and only predrilled about 1/8” into the top. I used 1 1/4” deck screws and had no problems with strip-out and there do not appear to be any gaps between the two pieces.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com