Reply by thor2015

  • Advertise with us

Posted on Router table cabinet

View thor2015's profile


46 posts in 2522 days

#1 posted 10-26-2016 03:09 AM

Just wanted to post a quick update. The cabinet is together but I goofed a bit. Somehow the middle shelf is about 1/8” too wide so the bottom is slightly narrower than the rest of the cabinet. It was hard to tell during the dry fit due to the fact that the plywood had a slight warp to it. My plan is to pull the top together to make it the same width as the middle shelf and just trim the back panel to fit the odd shape. With glue and screws I figure it will hold together just fine for my purposes and if down the road it starts to come apart I’ll just have to do it again but with quality plywood and double check my measurements.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics