Reply by thor2015

  • Advertise with us

Posted on Router table cabinet

View thor2015's profile


46 posts in 2525 days

#1 posted 10-25-2016 12:04 AM

Thanks, Chuck.

Well, you guys talked me into it. I returned the 1/2” MDF today for a second piece of 3/4” to make the top 1.5” thick. The funny thing is when I returned home I discovered the new piece was 24.5” wide instead of 24” like the first piece. Norm’s plans call for the MDF to be 24.5” so I took the first piece of 3/4” back and got a second one at 24.5” wide so now the top will have a little more surface area. I know that making the oak strip another 1/4” wide would have also solved the problem but this way I can stick a bit closer to the plans. The cabinet is shaping up- since I don’t have any large clamps yet I am doing this one panel at a time to make sure things stay as square as possible.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics