LumberJocks

Reply by Imakenicefirewood

  • Advertise with us

Posted on $ amout to offer for older unisaw with bent arbor: Answer $300

View Imakenicefirewood's profile

Imakenicefirewood

77 posts in 2236 days


#1 posted 09-23-2016 04:47 PM

Well I ended up buying the saw for $300. I was just about to pull the trigger on a unifence for $200 and realized that I may be able to get the Biesmeyer fence and the Unisaw for not a lot more, so I went back and offered him $250. We landed at $300.

My brother helped me get it home and in the garage (which is a mess…been building book shelves for a few local teachers.) I plugged it in and the motor runs fine. The fun will come when I put the arbor back in and try to figure out why the blade has some wobble in it.

There is a little rust on the top, but other than that it seems to be in pretty good shape for sitting idle for the better part of a decade.

It came with the original arbor and the new one he installed with new bearings , but it still had the wobble. After the new arbor didn’t work, he just bought a new saw and moved this one off to the side.

I checked the washer and the nut to see if they are flat. The washer is, but the nut is not. Could this be the mysterious cause to the wobble?


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com