LumberJocks

Reply by HokieKen

  • Advertise with us

Posted on Need help with dealing with tearout

View HokieKen's profile

HokieKen

15153 posts in 2016 days


#1 posted 09-19-2016 11:48 AM

I’d say that looks just fine BB1. Regarding sanding, the issue is that 1/2 of the joint on each face is end grain and the other 1/2 is long grain. Personally with joints like that, I sand across the grain, only at the joints, until I get everything smooth then sand it up to 320 grit. Then I go back and sand the entire thing with the grain to 220. Since the cross grain scratch marks are finer, the 220 grit typically removes them well enough. YMMV of course.

-- Kenny, SW VA, Go Hokies!!!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com