LumberJocks

Reply by zippymorocco

  • Advertise with us

Posted on keeping small table flat

View zippymorocco's profile

zippymorocco

39 posts in 1825 days


#1 posted 09-14-2016 02:12 AM

Thank you for the posts.

Jerry, when I say QSWO edging I mean a border. Probably a 1”-2” wide border of oak because it could take a little more abuse as compared to reclaimed fir. The Fir will be flat sawn only the edges will be quarter sawn.

JBrow, I think you might be on to something with the fastening system. The old tables were just screwed to the base with no allowance for movement. I will take this into account with the new tops.

My original thought was to coat the bottoms with a cheap poly to save time and money. However, now Smitty has me wondering if it is necessary at all. I always heard that you have to coat both sides equally until now.

Smitty, I sure like the idea of not finishing or at least not using the Enviro-tex to finish the bottom. Thank you for sharing the article. I will look into this further.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com